|
2000 Datasheet, PDF (10/24 Pages) Make-Ps – Single, Dual, Triple Output DC/DC Converter | |||
|
◁ |
10 | Keysight | Inï¬niiVision 2000 X-Series Oscilloscopes - Data Sheet
Other Productivity Tools (Continued)
Keysight Spectrum Visualizer (ASV) software
This PC-based software package connects to the scope via
USB or ethernet connection and uses the Keysight I/O libraries
to communicate. It provides advanced FFT frequency domain
analysis at a cost-effective price as well as spectrum and
spectrogram analysis with an intuitive user interface that RF
engineers are familiar with. Tools include:
Spectrum measurements
ââ Power (dBm) vs. frequency
ââ Horizontal (x-axis): Specify center frequency and frequency
span, or start and stop frequencies
ââ Vertical (y-axis): Specify reference level (dBm) and scale
(dB/div)
ââ Settable resolution bandwidth
ââ Flat top, Gaussian, or Hanning windows applied to the time
domain data for the FFT analysis
ââ Marker to peak amplitude, and marker to center frequency.
ââ Marker peak search can be enabled for time-varying signals
ââ Multiple marker, with delta X and delta Y readouts
Waterfall View for ASV Spectrogram Measurement
Acquisition and display modes
ââ Free Run (continuous ), Triggered, Stop, Single, Preset
ââ Triggered mode: specify trigger power level (dBm), single or
continuous sweep
ââ Enable/disable y-axis label
ââ Enable/disable main trace display
ââ Max hold display mode
ââ Gated Measurements
ââ Multiple viewing options
ââ Spectrogram
ââ Waterfall
ââ 3D
ââ Changeable scaling settings on main window
ââ Local language support
ââ Multiple oscilloscopes can be configured to allow user to
rapidly switch between multiple instruments
Close-Up Detail on Frequency Shift Keying (FSK) Characteristics with the
ASV Spectrogram Measurement
Arbitrary waveform generator source control
ââ 20 MHz sine wave
ââ 10 MHz square wave
ââ Pulsed waveform
ââ WaveGen source settings can be altered while ASV is running
for interactive signal source and analysis capability
|
▷ |