E4982A Datasheet, PDF (16/22 Pages) Agilent(Hewlett-Packard) – New Standard for High-Speed Component Tests

16 | Keysight | E4982A LCR Meter - Data Sheet
Interface
GPIB
USB host port
USB (USBTMC ) interface port
LAN
Video output
Handler interface
Connector type
Signal type
Output signal
Input signal
Pin location
24-pin D-Sub (Type D-24), female; compatible with IEEE-488.
IEEE-488 interface specification is designed to be used in environment where electrical noise is
relatively low. LAN or USBTMC interface is recommended to use at the higher electrical noise
environment.
Universal serial bus jack, Type A configuration; female; provides connection to mouse, key board,
printer or USB stick memory.
Universal serial bus jack, Type B configuration (4 contacts inline); female; provides connection to
an external PC; compatible with USBTMC-USB488 and USB 2.0.LA
USB Test and Measurement Class (TMC) interface that communicates over USB, complying with
the IEEE 488.1 and IEEE 488.2 standards.
10/100/1000 Base T Ethernet, 8-pin configuration; auto selects between the two data rates
15-pin mini D-Sub; female; drives VGA compatible monitors
36-pin centronics, female
Negative logic, opto-isolated, open collector output
BIN sort result (BIN 1 to BIN 13, OUT_OF_GOOD_BINS)
DC resistance pass/fail (DCR_OUT_OF_RANGE)
Overload (OVLD)
Alarm (ALARM)
End of analog measurement (INDEX)
End of measurement (EOM)
Ready for trigger (READY_FOR_TRIG)
Eternal trigger (EXT_TRIG)
Key lock (KEY_LOCK)
See the following figure. Refer to Help for the definition of each pin.
Figure 11. Pin assignment