IS61NLF204836B Datasheet, PDF (14/38 Pages) Integrated Silicon Solution, Inc – 100 percent bus utilization

IS61NLF204836B/IS61NVF/NVVF204836B
IS61NLF409618B/IS61NVF/NVVF409618B 
DC ELECTRICAL CHARACTERISTICS (Over Operating Range) ^{1, 2, 3}
3.3V 2.5V 1.8V
Symbol Parameter
Test Conditions
Min. Max.
Min. Max.
Min. Max. Unit
Voh
Output HIGH Voltage

Ioh = –4.0 mA  (3.3V)
2.4 —
Ioh = –1.0 mA  (2.5V, 1.8V)
2.0 — Vddq - 0.4 — V
Vol
Output LOW Voltage

Iol = 8.0 mA  (3.3V)
— 0.4
Iol = 1.0 mA  (2.5V, 1.8V)
— 0.4
— 0.4 V
Vih
Input HIGH Voltage
2.0 Vdd + 0.3
1.7 Vdd + 0.3 0.6Vdd V dd + 0.3 V
Vil
Input LOW Voltage
–0.3 0.8
–0.3 0.7
–0.3 0.3Vdd V
Ili
Input Leakage Current
Vss ≤ Vin ≤ Vdd^(1,4)

Input Current of MODE
Vss ≤ Vin ≤ Vdd⁽⁵⁾

Input Current of ZZ
Vss ≤ Vin ≤ Vdd⁽⁶⁾
–5 5
–30 5
–5 30
–5 5
–30 5
–5 30
–5 5 µA
–30 5
–5 30
Ilo
Output Leakage Current Vss ≤ Vout ≤ Vddq, OE = Vih –5 5
–5 5
–5 5 µA
Notes:
1. All voltages referenced to ground.
2. Overshoot:
3.3V and 2.5V: Vih (AC) ≤ Vdd + 1.5V (Pulse width less than tkc /2)
1.8V: Vih (AC) ≤ Vdd + 0.5V (Pulse width less than tkc /2)
3. Undershoot:
3.3V and 2.5V: Vil (AC) ≥ -1.5V (Pulse width less than tkc /2)
1.8V: Vil (AC) ≥ -0.5V (Pulse width less than tkc /2)
4. Except MODE and ZZ.
5. MODE is connected to pull-up resister internally.
6. ZZ is connected to pull-down resister internally
POWER SUPPLY CHARACTERISTICS⁽¹⁾ (Over Operating Range)
Symbol Parameter
Icc
AC Operating

Supply Current


Isb
Standby Current

TTL Input


Isbi
Standby Current
CMOS Input


Test Conditions
Temp. range
Device Selected,
Com.
OE = Vih, ZZ ≤ Vil,
Ind.
All Inputs ≤ 0.2V or ≥ Vdd – 0.2V,
Cycle Time ≥ tkc min.
Device Deselected,
Vdd = Max.,
All Inputs ≤ Vil or ≥ Vih,
ZZ ≤ Vil, f = Max.
Com.
Ind.
Device Deselected,
Com.
Vdd = Max.,
Ind.
Vin ≤ Vss + 0.2V or ≥Vdd – 0.2V
f=0
6.5
7.5
MAX
MAX
x18 x36 x18 x36
Unit
260 260 240 240
mA
270 270 250 250
130 130 130 130
mA
135 135 135 135
115 115 115 115
mA
120 120 120 120
14
Integrated Silicon Solution, Inc. — www.issi.com
Rev. 00C
02/20/2013