JANSR2N7550T1 Datasheet, PDF (2/8 Pages) International Rectifier – RADIATION HARDENED POWER MOSFET THRU-HOLE (Low-Ohmic TO-254AA)

IRHMS597160, JANSR2N7550T1
Pre-Irradiation
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
Parameter
Min
BVDSS
Drain-to-Source Breakdown Voltage -100
∆BVDSS/∆TJ Temperature Coefficient of Breakdown —
Voltage
RDS(on)
Static Drain-to-Source On-State
—
Resistance
VGS(th)
Gate Threshold Voltage
-2.0
gfs
Forward Transconductance
24
IDSS
Zero Gate Voltage Drain Current
—
—
IGSS
IGSS
Qg
Qgs
Qgd
td_(on)
tr
td_(off)
tf
LS + LD
Gate-to-Source Leakage Forward
—
Gate-to-Source Leakage Reverse
—
Total Gate Charge
—
Gate-to-Source Charge
—
Gate-to-Drain (‘Miller’) Charge
—
Turn-On Delay Time
—
Rise Time
—
Turn-Off Delay Time
—
Fall Time
—
Total Inductance
—
Typ Max Units
——V
-0.13 — _V/°C
Test Conditions
VGS = 0V, ID = -1.0mA
Reference to 25°C, ID = -1.0mA
— 0.05 Ω
VGS = -12V, ID = -28.5A Ã
— -4.0 V
—— S
— -10
— -25 ^µA
— -100
— 100 ^nA
— 170
— 65 nC
— 30
VDS = VGS, ID = -1.0mA
VDS > -15V, IDS = -28.5A Ã
VDS= -80V ,VGS=0V
VDS = -80V,
VGS = 0V, TJ = 125°C
VGS = -20V
VGS = 20V
VGS =-12V, ID = -45A
VDS = -50V
— 35
— 100 ns
— 100
VDD = -50V, ID = -45A
VGS =-12V, RG = 1.2Ω
— 100
6.8 — _nH Measured from Drain lead (6mm /0.25in.
from package) to Source lead (6mm /0.25in.
from package) with Source wires internally
bonded from Source Pin to Drain Pad
Ciss
Coss
Crss
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
— 6110 —
— 1574 — ^pF
— 115 —
VGS = 0V, VDS = -25V
f = 1.0MHz
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
Test Conditions
IS
ISM
VSD
trr
QRR
Continuous Source Current (Body Diode)
Pulse Source Current (Body Diode) À
Diode Forward Voltage
Reverse Recovery Time
Reverse Recovery Charge
— — -45 _A
— — -180
— — -5.0 V
— — 200 ns
— — 1.6 µC
Tj = 25°C, IS = -45A, VGS = 0V Ã
Tj = 25°C, IF =-45A, di/dt ≤ -100A/µs
VDD ≤ -50V Ã
ton Forward Turn-On Time Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
Thermal Resistance
Parameter
RthJC
RthCS
RthJA
Junction-to-Case
Case-to-Sink
Junction-to-Ambient
Min Typ Max Units
— — 0.6
— 0.21 —
— — 48
°C/W
Test Conditions
Typical socket mount
Note: Corresponding Spice and Saber models are available on International Rectifier Website.
For footnotes refer to the last page
2
www.irf.com