ISL6307A Datasheet, PDF (8/33 Pages) Intersil Corporation – Ultra-high bandwidth 6-Phase PWM Controller with 8 Bit VID Code Capable of Precision RDS(ON) or DCR Differential Current Sensing

ISL6307A
Absolute Maximum Ratings
Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+6V
All Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . GND -0.3V to V_CC + 0.3V
ESD (Human Body Model). . . . . . . . . . . . . . . . . . . . . . . . . . . . .>2kV
ESD (Machine Model) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .>200V
ESD (Charged Device Model) . . . . . . . . . . . . . . . . . . . . . . . . >1.5kV
Thermal Information
Thermal Resistance (Typical, Notes 1, 2) θ_JA (°C/W) θ_JC (°C/W)
QFN Package. . . . . . . . . . . . . . . . . . . .
32
6.5
Maximum Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . 150°C
Maximum Storage Temperature Range . . . . . . . . . . . -65°C to 150°C
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . . 300°C
Operating Conditions
Supply Voltage, VCC (5V bias mode, Note 3) . . . . . . . . . . +5V ±5%
Ambient Temperature (ISL6307ACRZ) . . . . . . . . . . . . . 0°C to 70°C
Ambient Temperature (ISL6307AIRZ) . . . . . . . . . . . . .-40°C to 85°C
CAUTION: Stress above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational section of this specification is not implied.
NOTES:
1. θ_JA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See
Tech Brief TB379
2. For θ_JC, the “case temp” location is the center of the exposed metal pad on the package underside.
Electrical Specifications Operating Conditions: VCC = 5V or ICC < 25mA. Unless Otherwise Specified
PARAMETER
TEST CONDITIONS
MIN TYP MAX UNITS
VCC SUPPLY CURRENT
Nominal Supply
VCC = 5VDC; EN_PWR = 5VDC; R_T = 100kΩ,
ISEN1 = ISEN2 = ISEN3 = ISEN4 = -70µA
-
15 18 mA
Shutdown Supply
POWER-ON RESET AND ENABLE
VCC = 5VDC; EN_PWR = 0VDC; R_T = 100kΩ
-
10 12 mA
POR Threshold
VCC Rising
4.3 4.5 4.70 V
VCC Falling
3.7 3.9 4.20 V
EN_PWR Threshold
Rising
0.850 0.875 0.910 V
Hysteresis
- 130 -
mV
Falling
0.720 0.745 0.775 V
EN_VTT Threshold
Rising
0.850 0.875 0.910 V
Hysteresis
- 130 -
mV
Falling
0.720 0.745 0.775 V
REFERENCE VOLTAGE AND DAC
System Accuracy of ISL6307ACRZ
(VID = 1V-1.6V), T_J = 0°C to 70°C
System Accuracy of ISL6307ACRZ
(VID = 0.5V-1V), T_J = 0°C to 70°C
System Accuracy of ISL6307AIRZ
(VID = 1V-1.6V), T_J = -40°C to 85°C
System Accuracy of ISL6307AIRZ
(VID = 0.5V-1V), T_J = -40°C to 85°C
VID Pull Up
(Note 3)
(Note 3)
(Note 3)
(Note 3)
-0.5
-
0.5 %VID
-0.9
-
0.9 %VID
-0.6
-
0.6 %VID
-1
-
1 %VID
-60 -40 -20 µA
VID Input Low Level
-
-
0.4
V
VID Input High Level
0.8
-
-
V
DAC Source Current
-
4
7
mA
DAC Sink Current
-
-
300 µA
REF Source Current
45 50 55
µA
REF Sink Current
45 50 55
µA
8
FN9236.0
February 6, 2006