ISL29125_14 Datasheet, PDF (3/17 Pages) Intersil Corporation – Digital Red, Green and Blue Color Light Sensor with IR Blocking Filter

ISL29125
Absolute Maximum Ratings
VDD to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +4.0V
I²C Bus (SCL, SDA) and INT Pin Voltage. . . . . . . . . . . . . . . . . . -0.2V to 4.0V
I²C Bus (SCL, SDA) and INT Pin Current. . . . . . . . . . . . . . . . . . . . . . . <10mA
Input Voltage Slew Rate (Max) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.1V/µs
ESD Ratings
Human Body Model (HBM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.5kV
Machine Model (MM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300V
Charged Device Model (CDM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2kV
Thermal Information
Thermal Resistance (Typical)
θ_JA (°C/W)
6 Ld ODFN Package (Note 4) . . . . . . . . . . . . . . . . . . . . .
260
Maximum Junction Temperature (TJ_MAX). . . . . . . . . . . . . . . . . . . . . . . +90°C
Storage Temperature Range. . . . . . . . . . . . . . . . . . . . . . . .-40°C to +100°C
Operating Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40°C to +85°C
Pb-Free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product
reliability and result in failures not covered by warranty.
NOTE:
4. θ_JA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See Tech
Brief TB379.
Electrical Specifications V_DD = 3.0V, T_A = +25°C, 16-bit ADC operation, unless otherwise specified.
SYMBOL
PARAMETER
CONDITION
MIN
MAX
(Note 6) TYP (Note 6) UNIT
V_DD Power Supply Range
2.25
3.63
V
I_DD Supply Current
56
85
µA
I_DD1 Supply Current when Standby
Software disabled
29
37
µA
I_DD2 Supply Current when Powered Down
Software disabled
0.5
1.45
µA
V_I2C Supply Voltage Range for I²C Interface
1.7
3.63
V
t_INT ADC Integration/Conversion Time
16-bit ADC data
101
ms
f_I2C I²C Clock Rate Range
500
kHz
D_Dark Count Output When Dark
Lux = 0 lux, Range = 0 (375lux)
1
5
Counts
Illuminant A is at 300 lux (see Note 11
±5
CCT Corrected Color Temperature Accuracy
onpage 11 and “References” on page 15 about
CIE 1931, Planckian locus and standard
%
illuminants)
D_FS Full Scale ADC Code
ADC 16 bits
Green = 565nm
65535 Counts
18
µW/cm²
Fullscale on Range 0
Red = 620nm
20
µW/cm²
Blue = 485nm
30
µW/cm²
NOTES:
5. 565nm Green, 620nm Red LED, 485nm Blue in white LED is used in production test. It’s irradiance is calibrated to produce the same DATA count
against an illuminance level of 130 lux fluorescent light.
6. Compliance to datasheet limits is assured by one or more methods: production test, characterization and/or design.
7. SDA and INT current sinking capability are guaranteed by design.
Submit Document Feedback
3
FN8424.2
January 24, 2014