English
Language : 

ISL62881C_14 Datasheet, PDF (23/37 Pages) Intersil Corporation – Single-Phase PWM Regulator for IMVP-6.5 Mobile CPUs and GPUs
Compensation & Current Sensing Network Design for Intersil Multiphase R^3 Regulators for IMVP-6.5
Jia Wei, jwei@intersil.com, 919-405-3605
Attention: 1. "Analysis ToolPak" Add-in is required. To turn on, go to Tools--Add-Ins, and check "Analysis ToolPak".
2. Green cells require user input
Compensator Parameters
Operation Parameters
Controller Part Number: ISL6288x
Phase Number:
2
Vin:
12 volts
Vo:
1.15 volts
Full Load Current:
50 Amps
AV (s)
KZi
˜ Zi
˜ ¨¨©§1
s
2Sf z1
¸¸¹·
˜ ¨¨©§1
s
2Sf z2
¸¸¹·
s
˜ ¨¨©§1
s
2Sf
p1
¸¸¹· ˜ ¨¨©§1
s
2Sf
p2
¸¸¹·
Estimated Full-Load Efficiency:
87 %
Number of Output Bulk Capacitors:
3
Capacitance of Each Output Bulk Capacitor:
ESR of Each Output Bulk Capacitor:
ESL of Each Output Bulk Capacitor:
Number of Output Ceramic Capacitors:
470 uF
4.5 m :
0.6 nH
30
Recommended Value
R1
2.870 k :
R2 387.248 k :
R3
0.560 k :
User-Selected Value
R1
2.87 k :
R2
412 k :
R3
0.562 k :
Capacitance of Each Output Ceramic Capacitor:
ESR of Each Output Ceramic Capacitor:
10 uF
3 m:
C1 188.980 pF
C2 498.514 pF
C1
150 pF
C2
390 pF
ESL of Each Output Ceramic Capacitor:
3 nH
C3
32.245 pF
C3
32 pF
Switching Frequency:
300 kHz
Inductance Per Phase:
CPU Socket Resistance:
Desired Load-Line Slope:
0.36 uH
0.9 m :
1.9 m :
Use User-Selected Value (Y/N)? N
Performance and Stability
Desired ISUM- Pin Current at Full Load:
33.1 uA
T1 Bandwidth: 190kHz
T2 Bandwidth: 52kHz
(This sets the over-current protection level)
T1 Phase Margin: 63.4°
T2 Phase Margin: 94.7°
Changing the settings in red requires deep understanding of control loop design
Place the 2nd compensator pole fp2 at:
1.9 xfs (Switching Frequency)
Tune KȦi to get the desired loop gain bandwidth
Tune the compensator gain factor KȦi:
1.15
(Recommended KȦi range is 0.8~2)








(
Loop Gain, Gain Curve
7 V
7 V
(
( (
)UHTXHQF\ +]
(
(









(
Output Impedance, Gain Curve
(
( (
)UHTXHQF\ +]
(
(
Loop Gain, Phase Curve

Output Impedance, Phase Curve


7 V

7 V





(
(
( (
)UHTXHQF\ +]
(
(

(
(
( (
)UHTXHQF\ +]
(
(
Current Sensing Network Parameters
Operation Parameters
Inductor DCR
0.88 m :
Rsum
3.65 k :
Rntc
10 k :
Rntcs
2.61 k :
Rp
11 k :
Recommended Value
Cn 0.294 uF
Ri 1014.245 :
User Selected Value
Cn
0.294 uF
Ri
1000 :
FIGURE 23. SCREENSHOT OF THE COMPENSATOR DESIGN SPREADSHEET