X9418_06 Datasheet, PDF (20/20 Pages) Intersil Corporation – Dual Digitally Controlled Potentiometers

X9418
Thin Shrink Small Outline Package Family (TSSOP)
0.25 M C A B
D
A
N
(N/2)+1
E E1
PIN #1 I.D.
1
B
TOP VIEW
(N/2)
0.20 C B A
2X
N/2 LEAD TIPS
C
e
0.05
H
SEATING
PLANE
0.10 C
N LEADS
b
0.10 M C A B
SIDE VIEW
SEE DETAIL “X”
MDP0044
THIN SHRINK SMALL OUTLINE PACKAGE FAMILY
SYMBOL 14 LD 16 LD 20 LD 24 LD 28 LD TOLERANCE
A
1.20 1.20 1.20 1.20 1.20
Max
A1
0.10 0.10 0.10 0.10 0.10
±0.05
A2
0.90 0.90 0.90 0.90 0.90
±0.05
b
0.25 0.25 0.25 0.25 0.25 +0.05/-0.06
c
0.15 0.15 0.15 0.15 0.15 +0.05/-0.06
D
5.00 5.00 6.50 7.80 9.70
±0.10
E
6.40 6.40 6.40 6.40 6.40
Basic
E1
4.40 4.40 4.40 4.40 4.40
±0.10
e
0.65 0.65 0.65 0.65 0.65
Basic
L
0.60 0.60 0.60 0.60 0.60
±0.15
L1
1.00 1.00 1.00 1.00 1.00 Reference
NOTES:
Rev. E 12/02
1. Dimension “D” does not include mold flash, protrusions or gate
burrs. Mold flash, protrusions or gate burrs shall not exceed
0.15mm per side.
2. Dimension “E1” does not include interlead flash or protrusions.
Interlead flash and protrusions shall not exceed 0.25mm per
side.
3. Dimensions “D” and “E1” are measured at dAtum Plane H.
4. Dimensioning and tolerancing per ASME Y14.5M-1994.
c
END VIEW
A ^A2
A1
L1
L
DETAIL X
GAUGE
PLANE
0.25
0° - 8°
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
20
FN8194.3
October 12, 2006