X9418_06 Datasheet, PDF (19/20 Pages) Intersil Corporation – Dual Digitally Controlled Potentiometers

X9418
Small Outline Plastic Packages (SOIC)
N
INDEX
AREA
H
E
-B-
0.25(0.010) M B M
123
-A- _D
SEATING PLANE
A
L
h x 45^o
-C-
µα
e
A1
C
B
0.10(0.004)
0.25(0.010) M C A M B S
NOTES:
1. Symbols are defined in the “MO Series Symbol List” in Section 2.2 of
Publication Number 95.
2. Dimensioning and tolerancing per ANSI Y14.5M-1982.
3. Dimension “D” does not include mold flash, protrusions or gate burrs.
Mold flash, protrusion and gate burrs shall not exceed 0.15mm
(0.006 inch) per side.
4. Dimension “E” does not include interlead flash or protrusions. Inter-
lead flash and protrusions shall not exceed 0.25mm (0.010 inch) per
side.
5. The chamfer on the body is optional. If it is not present, a visual index
feature must be located within the crosshatched area.
6. “L” is the length of terminal for soldering to a substrate.
7. “N” is the number of terminal positions.
8. Terminal numbers are shown for reference only.
9. The lead width “B”, as measured 0.36mm (0.014 inch) or greater
above the seating plane, shall not exceed a maximum value of
0.61mm (0.024 inch)
10. Controlling dimension: MILLIMETER. Converted inch dimensions
are not necessarily exact.
M24.3 (JEDEC MS-013-AD ISSUE C)
24 LEAD WIDE BODY SMALL OUTLINE PLASTIC PACKAGE
INCHES
MILLIMETERS
SYMBOL MIN
MAX
MIN
MAX NOTES
A
0.0926 0.1043 2.35
2.65
-
A1
0.0040 0.0118 0.10
0.30
-
B
0.013 0.020
0.33
0.51
9
C
0.0091 0.0125 0.23
0.32
-
D
0.5985 0.6141 15.20 15.60
3
E
0.2914 0.2992 7.40
7.60
4
e
0.05 BSC
1.27 BSC
-
H
0.394 0.419 10.00 10.65
-
h
0.010 0.029
0.25
0.75
5
L
0.016 0.050
0.40
1.27
6
N
24
24
7
α
0^o
8^o
0^o
8^o
-
Rev. 0 12/93
19
FN8194.3
October 12, 2006