HMU16JC-35 Datasheet, PDF (1/13 Pages) Intersil Corporation – 16 x 16-Bit CMOS Parallel Multipliers

TM
Data Sheet
HMU16, HMU17
November 1999
File Number 2803.4
itle
MU
,
U1
b-
t
x
-Bit
OS
ral-
lti-
ers)
utho
)
ey-
rds
ter-
rpo-
ion,
i-
n-
ctor,
ral-
lti-
er,
C,
gi-
,
P,
e-
l
nc-
n,
se-
nd,
16 x 16-Bit CMOS Parallel Multipliers
The HMU16 and HMU17 are high speed, low power CMOS
16-bit x 16-bit multipliers ideal for fast, real time digital signal
processing applications.
The X and Y operands along with their mode controls (TCX
and TCY) have 17-bit input registers. The mode controls
independently specify the operands as either two’s
complement or unsigned magnitude format, thereby allowing
mixed mode multiplication operations.
Two 16-bit output registers are provided to hold the most and
least significant halves of the result (MSP and LSP). For
asynchronous output, these registers may be made
transparent through the use of the Feedthrough Control
(FT).
Additional inputs are provided for format adjustment and
rounding. The Format Adjust control (FA) allows the user to
select either a left shifted 31-bit product or a full 32-bit
product, whereas the round control (RND) provides the
capability of rounding the most significant portion of the
result.
The HMU16 has independent clocks (CLKX, CLKY, CLKL,
CLKM) associated with each of these registers to maximize
throughput and simplify bus interfacing. The HMU17 has
only a single clock input (CLK), but makes use of three
register enables (ENX, ENY and ENP). The ENX and ENY
inputs control the X and Y Input Registers, while ENP
controls both the MSP and LSP Output Registers. This
configuration facilitates the use of the HMU17 for
microprogrammed systems.
The two halves of the product may be routed to a single
16-bit three-state output port via a multiplexer, and in
addition, the LSP is connected to the Y-input port through a
separate three-state buffer.
Features
• 16 x 16-Bit Parallel Multiplier with Full 32-Bit Product
• High-Speed (35ns) Clocked Multiply Time
• Low Power Operation
- I_CCSB = 500µA Maximum
- I_CCOP = 7.0mA Maximum at 1MHz
• Supports Two’s Complement, Unsigned Magnitude and
Mixed Mode Multiplication
• HMU16 is Compatible with the AM29516, LMU16,
IDT7216 and the CY7C516
• HMU17 is Compatible with the AM29517, LMU17,
IDT7217 and the CY7C517
• TTL Compatible Inputs/Outputs
• Three-State Outputs
Applications
• Fast Fourier Transform Analysis
• Digital Filtering
• Graphic Display Systems
• Image Processing
• Radar and Sonar
• Speech Synthesis and Recognition
Ordering Information
PART NUMBER
HMU16JC-35
HMU16JC-45
TEMP.
RANGE (^oC)
PACKAGE
0 to 70 68 Ld PLCC
0 to 70 68 Ld PLCC
HMU16GC-35
HMU16GC-45
HMU17JC-35
HMU17JC-45
0 to 70
0 to 70
0 to 70
0 to 70
68 Ld CPGA
68 Ld CPGA
68 Ld PLCC
68 Ld PLCC
HMU17GC-35
HMU17GC-45
0 to 70
0 to 70
68 Ld CPGA
68 Ld CPGA
PKG.
NO.
N68.95
N68.95
G68.B
G68.B
N68.95
N68.95
G68.B
G68.B
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil and Design is a trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2001, All Rights Reserved