SMFLHP283R3S_16 Datasheet, PDF (13/15 Pages) Interpoint Corporation Company – SMFLHP Single and Dual DC-DC Converters

Crane Aerospace & Electronics Power Solutions
SMFLHP Single and Dual DC-DC Converters
28 Volt input – 100 Watt
TOP VIEW CASE V
Flanged case, down leaded
Case “V” requires a “V” in the Case Option position of the model number.
Angled corner
indicates pin one.
1.380 (35.05)
1.250 (31.75)
1.050 (26.67)
0.850 (21.59)
0.650 (16.51)
0.450 (11.43)
0.250 (6.35)
0.120 (3.05)
0.000
Maximum dimensions: 3.005 x 1.505 (76.33 x 38.23 mm)
(3.45 (87.6))
lead center to lead center
1
12
2
11
3
10
4
9
5
8
6
7
0.128 dia
(3.25)
0.040 dia
(1.02)
Seam Seal
Weight: 86 grams maximum
Case dimensions in inches (mm)
Tolerance ±0.005 (0.13) for three decimal places
±0.01 (0.3) for two decimal places
unless otherwise specified
Lead Detail
0.150 (3.81)
0.400 (10.16) max.
0.220 (5.59)
0.000
CAUTION
Heat from reflow or wave soldering may damage the device. Solder pins
individually with heat application not exceeding 300°C for 10 seconds per pin.
(0.250 ±0.05
(6.35 ±1.27))
0.050 typical
inner radius
Materials
Header Cold Rolled Steel/Nickel/Gold
Cover Kovar/Nickel
Pins
OFHC copper/gold, compresssion glass seal
Gold plating of 50 - 150 microinches is included in pin diameter
Seal Hole: 0.120 ±0.002 (3.05 ±0.05)
(2.80 (71.1))
(lead center to lead center)
Case V, Rev H, 2014.03.06
Please refer to the numerical dimensions for accuracy.
Figure 19: Case V
www.craneae.com/interpoint
Page 13 of 15
Rev AC - 2016.02.17