|
80C196MH Datasheet, PDF (19/41 Pages) Intel Corporation – 8XC196MH INDUSTRIAL MOTOR CONTROL CHMOS MICROCONTROLLER | |||
|
◁ |
®
8XC196MH INDUSTRIAL MOTOR CONTROL CHMOS MICROCONTROLLER
ELECTRICAL CHARACTERISTICS
ABSOLUTE MAXIMUM RATINGS*
Storage Temperature ................................ â 65°C to + 150°C
Ambient Temperature
under Bias.............................................. â 40°C to + 85°C
Voltage from VPP or EA# to
VSS or ANGND (Note 1) ...................... â 0.5 V to + 13.0 V
Voltage with respect to
VSS or ANGND (Note 1) ........................ â 0.5 V to + 7.0 V
(This includes VPP on ROM and CPU devices.)
Power Dissipation .......................................................... 1.5 W
(based on package heat transfer limitations, not device
power consumption)
NOTICE: This data sheet contains preliminary infor-
mation on new products in production. It is valid for
the devices indicated in the revision history. The
specifications are subject to change without notice.
*WARNING: Stressing the device beyond the âAbsolute
Maximum Ratingsâ may cause permanent damage. These
are stress ratings only. Operation beyond the âOperating
Conditionsâ is not recommended and extended exposure
beyond the âOperating Conditionsâ may affect device reli-
ability.
OPERATING CONDITIONS*
TA (Ambient Temperature Under Bias) .........â 40°C to + 85°C
VCC (Digital Supply Voltage) .......................... 4.50 V to 5.50 V
VREF (Analog Supply Voltage) ....................... 4.50 V to 5.50 V
FOSC (Oscillator Frequency) (Note 2) ........... 8 MHz to 16 MHz
NOTES:
1. ANGND and VSS should be at nominally the same
potential.
2. Testing is performed down to 8 MHz, although
the device is static by design and will typically
operate below 1 Hz.
19
|
▷ |