TLE6240GP_10 Datasheet, PDF (9/37 Pages) Infineon Technologies AG – Smart 16-Channel Low-Side Switch

TLE6240GP
Smart 16-Channel Low-Side Switch
Maximum Ratings and Operating Conditions
4
Maximum Ratings and Operating Conditions
4.1
Absolute Maximum Ratings
Absolute Maximum Ratings ¹⁾
T_j = -40 °C to +150 °C; all voltages with respect to ground, positive current flowing into pin
(unless otherwise specified)
Pos.
Parameter
Symbol
Limit Values Unit Conditions
Min.
Max.
Voltages
4.1.1
4.1.2
Supply voltage
Continuous Drain Source Voltage
(OUT1 to OUT16)
V_S
-0.3
7
V_DS
–
45
V–
V–
4.1.3 Input Voltage, All Inputs and Data Lines
V_IN
Currents
-0.3
7
V–
4.1.4
Output current per Channel
(see Chapter 5)
I_D(lim)
–
I_{D(lim) min} A
–
4.1.5 Output current per Channel
I_{D 1-8}
–
(All 16 Channels ON; Mounted on PCB)²⁾
I_{D 9-16}
–
4.1.6 Output current
I_Dmax
–
(Max. total current of all channels on; Heat
Sink required)
0.3
A T_A = 25 °C
0.5
A T_A = 25 °C
14
A–
ESD Susceptibility
4.1.7 Electrostatic Discharge Voltage
1) Not subject to production test, specified by design.
V_ESD
–
2000
V
HBM³⁾
2) Output current rating so long as maximum junction temperature is not exceeded. At T_A = 125 °C the output current has to
be calculated using R_thJA according mounting conditions.
3) Human Body Model according to EIA/JESD22-A114-E.
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
Data Sheet
9
Rev.3.3, 2010-02-15