XC2385A_14 Datasheet, PDF (89/141 Pages) Infineon Technologies AG – 16/32-Bit Single-Chip Microcontroller

XC2385A, XC2387A
XC2000 Family / Base Line
Electrical Parameters
4.2.2 DC Parameters for Lower Voltage Area
Keeping signal levels within the limits specified in this table ensures operation without
overload conditions. For signal levels outside these specifications, also refer to the
specification of the overload current I_OV.
Note: Operating Conditions apply.
Table 15 is valid under the following conditions:
V_DDP ≥ 3.0 V; V_DDPtyp = 3.3 V; V_DDP ≤ 4.5 V
Table 15 DC Characteristics for Lower Voltage Range
Parameter
Symbol
Values
Unit Note /
Min. Typ. Max.
Test Condition
Pin capacitance (digital
inputs/outputs). To be
doubled for double bond
pins.¹⁾
Input Hysteresis²⁾
Absolute input leakage
current on pins of analog
ports³⁾
C_IO CC −
−
HYS CC 0.07 x −
V_DDP
|I_OZ1|
−
10
CC
10
pF not subject to
production test
−
V R_S = 0 Ohm
200 nA V_IN > V_SS;
V_IN < V_DDP
Absolute input leakage |I_OZ2| −
current for all other pins. CC
To be doubled for double
bond pins.³⁾¹⁾⁴⁾
−
0.2 2.5 μA T_J ≤ 110 °C;
V_IN < V_DDP;
V_IN > V_SS
0.2 8
μA T_J ≤ 150 °C;
V_IN < V_DDP;
V_IN > V_SS
Pull Level Force Current⁵⁾ |I_PLF| SR 150 −
−
6)
Pull Level Keep Current⁷⁾ |I_PLK| −
−
10
μA ⁶⁾
SR
Input high voltage
(all except XTAL1)
Input low voltage
(all except XTAL1)
Output High voltage⁸⁾
V_IH SR 0.7 x −
V_DDP
V_IL SR -0.3 −
V_OH CC V_DDP −
- 1.0
V_DDP −
- 0.4
V_DDP V
+ 0.3
0.3 x V
V_DDP
−
V
−
V
I_OH ≥ I_OHmax
I_OH
≥
I 9)
OHnom
Data Sheet
89
V2.12, 2014-06