XC2385A_14 Datasheet, PDF (113/141 Pages) Infineon Technologies AG – 16/32-Bit Single-Chip Microcontroller

XC2385A, XC2387A
XC2000 Family / Base Line
Electrical Parameters
4.6.4 Pad Properties
The output pad drivers of the XC238xA can operate in several user-selectable modes.
Strong driver mode allows controlling external components requiring higher currents
such as power bridges or LEDs. Reducing the driving power of an output pad reduces
electromagnetic emissions (EME). In strong driver mode, selecting a slower edge
reduces EME.
The dynamic behavior, i.e. the rise time and fall time, depends on the applied external
capacitance that must be charged and discharged. Timing values are given for a
capacitance of 20 pF, unless otherwise noted.
In general, the performance of a pad driver depends on the available supply voltage
V_DDP. The following table lists the pad parameters.
Note: These parameters are not subject to production test but verified by design and/or
characterization.
Note: Operating Conditions apply.
Data Sheet
113
V2.12, 2014-06