V23818-N15-L616 Datasheet, PDF (8/20 Pages) Infineon Technologies AG – Small Form Factor Single Mode 1300 nm Multirate up to 2.5 Gbit/s Transceiver 2x10 Pinning with LC™ Connector, with Collar

V23818-N15-L6xx
Description
Description
The Infineon 2.5 Gigabit single mode transceiver – part of the Infineon Small Form
Factor transceiver family – is based on and compliant to ITU-T G.957 STM-16, S-16.1
and SONET OC-48 SR-1.
This transceiver is also suitable for multirate applications. The performance at lower
datarates may vary from application to application and is link dependent. Refer to
Infineon Application Note 97 for more information.
The appropriate fiber optic cable is 9 µm single mode fiber with LC connector.
The Infineon OC-48 single mode transceiver is a single unit comprised of a transmitter,
a receiver, and an LC receptacle. This design frees the customer from many alignment
and PC board layout concerns.
This transceiver supports the LC connectorization concept, which competes with UTP/
CAT 5 solutions. It is compatible with RJ-45 style backpanels for fiber-to-the-desktop
applications while providing the advantages of fiber optic technology. The transmission
distance is up to 15 km.
The module is designed for low cost LAN, WAN, and up to 2.5 Gbit/s applications. It can
be used as the network end device interface in mainframes, workstations, servers, and
storage devices, and in a broad range of network devices such as bridges, routers, hubs,
and local and wide area switches.
This transceiver operates at up to 2.5 Gbit/s from a single power supply (+3.3 V). The
full differential data inputs and outputs are LVPECL compatible.
Data Sheet
8
2003-09-10