V23818-N15-L616 Datasheet, PDF (4/20 Pages) Infineon Technologies AG – Small Form Factor Single Mode 1300 nm Multirate up to 2.5 Gbit/s Transceiver 2x10 Pinning with LC™ Connector, with Collar

V23818-N15-L6xx
Pin Configuration
PDBias
Connect pin 1 to V_CC through a bias resistor, of a value not exceeding 2 kΩ, as shown in
Figure 2 to monitor PIN photo detector bias current. Leave pin floating if not used.
Typical behaviour is shown in Figure 3 and Figure 4 using a 2 kΩ load.
V_CC
Pin 1
≤ 2 kΩ
V_bias
Figure 2 Photo Detector Bias Interface
File: 1307
Data Sheet
4
2003-09-10