V23818-N15-L616 Datasheet, PDF (15/20 Pages) Infineon Technologies AG – Small Form Factor Single Mode 1300 nm Multirate up to 2.5 Gbit/s Transceiver 2x10 Pinning with LC™ Connector, with Collar

V23818-N15-L6xx
Eye Safety
7) _{For V23818-N15-L653/L656.}
8) _{Monitor current needs to be sunk to VCC.}
Eye Safety
This laser based single mode transceiver is a Class 1 product.
It complies with IEC 60825-1 and FDA 21 CFR 1040.10 and 1040.11.
The transceiver has been certified with FDA under accession number 9520890.
To meet laser safety requirements the transceiver shall be operated within the Absolute
Maximum Ratings.
Attention: All adjustments have been made at the factory prior to shipment of the
devices. No maintenance or alteration to the device is required.
Tampering with or modifying the performance of the device will result
in voided product warranty.
Note: Failure to adhere to the above restrictions could result in a modification that is
considered an act of “manufacturing”, and will require, under law, recertification of
the modified product with the U.S. Food and Drug Administration (ref. 21 CFR
1040.10 (i)).
Laser Data
Wavelength
Total Output Power
(as defined by IEC: 7 mm aperture at 14 mm distance)
Total Output Power
(as defined by FDA: 7 mm aperture at 20 cm distance)
Beam Divergence
1300 nm
< 2 mW
< 180 µW
6°
FDA
Complies with 21 CFR
1040.10 and 1040.11
Figure 11 Required Labels
IEC
Class 1 Laser Product
File: 1401
Indication of
laser aperture
and beam
Figure 12 Laser Emission
Data Sheet
Tx
20 19 18 17 16 15 14 13 12 11
Top view
Rx
1 2 3 4 5 6 7 8 9 10
File: 1334
15
2003-09-10