|
PTAC240502FC Datasheet, PDF (8/8 Pages) Infineon Technologies AG – Thermally-Enhanced High Power RF LDMOS FET | |||
|
◁ |
PTAC240502FC V1
Revision History
Revision Date
Data Sheet Type Page
01
2013-07-16
Advance
All
02
2013-11-13
Production
All
02.1
2013-11-27
Production
1
02.2
2014-05-14
Production
2
Subjects (major changes since last revision)
Data Sheet reï¬ects advance speciï¬cation for product development
Data Sheet reï¬ects released product speciï¬cation
Revised ESD classiï¬cation
Revised juntion temperature in Maximum Ratings table
We Listen to Your Comments
Any information within this document that you feel is wrong, unclear or missing at all?
Your feedback will help us to continuously improve the quality of this document.
Please send your proposal (including a reference to this document) to:
highpowerRF@inï¬neon.com
To request other information, contact us at:
+1 877 465 3667 (1-877-GO-LDMOS) USA
or +1 408 776 0600 International
Edition 2014-05-14
Published by
Inï¬neon Technologies AG
85579 Neubiberg, Germany
© 2014 Inï¬neon Technologies AG
All Rights Reserved.
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics.
With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the
application of the device, Inï¬neon Technologies hereby disclaims any and all warranties and liabilities of any kind,
including without limitation, warranties of non-infringement of intellectual property rights of any third party.
Information
For further information on technology, delivery terms and conditions and prices, please contact the nearest
Inï¬neon Technologies Ofï¬ce (www.inï¬neon.com/rfpower).
Warnings
Due to technical requirements, components may contain dangerous substances. For information on the types in question,
please contact the nearest Inï¬neon Technologies Ofï¬ce.
Inï¬neon Technologies components may be used in life-support devices or systems only with the express written approval of In-
ï¬neon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device
or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be
implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is
reasonable to assume that the health of the user or other persons may be endangered.
Data Sheet
8 of 8
Rev. 02.2, 2014-05-14
|