TLF4949 Datasheet, PDF (7/23 Pages) Infineon Technologies AG – 5V Low Drop Out Linear Voltage Regulator

TLF4949
General Product Characteristics
4
General Product Characteristics
4.1
Absolute Maximum Ratings
Absolute Maximum Ratings ¹⁾
T_j = -40°C to +125°C; all voltages with respect to ground, direction of current as shown in Figure 4 “Application
Diagram” on Page 15 (unless otherwise specified)
Pos.
Parameter
Symbol
Limit Values
Unit Conditions
Min.
Max.
Voltage Rating
4.1.1 DC Operating Supply
4.1.2 Transient Supply Voltage
4.1.3 Preregulator Output
4.1.4 Voltage Regulator Output
4.1.5 Reset Output
4.1.6 Sense Input
4.1.7 Sense Output Voltage
4.1.8 Reset Delay
Current Rating
V_IN
-0.3
28
V_{IN_TR}
–
45
V_PRE
–
7
V_OUT
-0.3
20
V_RO
-0.3
20
V_SI
-30
40
V_SO
-0.3
20
V_D
-0.3
7
V–
V
2)
V–
V–
V–
V–
V–
V–
4.1.9 Preregulator Output
4.1.10 Reset Out
4.1.11 Sense Out
Temperatures
I_PRE
–
5
mA –
I_RO
–
5
mA –
I_SO
–
5
mA –
4.1.12 Junction Temperature
4.1.13 Storage Temperature
ESD Susceptibility
T_j
-40
150
°C
T_stg
-50
150
°C
4.1.14 ESD Resistivity to GND
V_ESD
-4
4
kV
4.1.15 ESD Resistivity to GND
V_ESD
-1
1
kV
1) Not subject to production test, specified by design.
2) For transient durations of t_TR < 1s.
3) ESD susceptibility, HBM according to ANSI/ESDA/JEDEC JS-001 (1.5 kΩ, 100 pF).
4) ESD susceptibility, Charged Device Model “CDM” ESDA STM5.3.1 or ANSI/ESD S.5.3.1.
–
–
HBM³⁾
CDM⁴⁾
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
Data Sheet
7
Rev. 1.0, 2012-05-07