TLE6251-2G Datasheet, PDF (6/35 Pages) Infineon Technologies AG – High Speed CAN-Transceiver with Wake and Failure Detection

Pin Symbol
8
NERR
9
WK
10
V_S
11
SPLIT
12
CANL
13
CANH
14
NSTB
TLE6251-2G
Pin Configuration
Function
Error Flag Output;
Failure and Wake - Up indication output, active “Low”
Output voltage level depends on the V_IO supply
Wake - Up Input;
Local Wake - Up input;
Wake - Up input sensitive to a level change in both directions, “High” to “Low” and
vice versa.
Battery Voltage Supply;
100 nF decoupling capacitor to GND recommend.
Split Termination Output;
Stabilization output to support the recessive voltage level of the CAN bus lines.
CAN Bus Low Level I/O;
“Low” in dominant state
CAN Bus High Level I/O;
“High” in dominant state
Stand-By Control input;
Integrated pull-down resistor;
“Low” for Stand-By or Sleep Mode
Data Sheet
6
Rev. 1.0, 2009-05-07