TLE6251-2G Datasheet, PDF (3/35 Pages) Infineon Technologies AG – High Speed CAN-Transceiver with Wake and Failure Detection

High Speed CAN-Transceiver with Wake and Failure
Detection
TLE6251-2G
1
Overview
Features
• HS CAN Transceiver with data transmission rates up to 1 MBaud
• Compliant to ISO 11898-5
• Very low power consumption in Sleep Mode
• Bus Wake - Up and local Wake - Up
• Inhibit output to control external circuitry
• Split termination to stabilize the recessive level
• Separate V_IO input to adapt different micro controller supply voltages
• Separate output for failure diagnosis
• Optimized for low electromagnetic emission (EME)
• Optimized for a high immunity against electromagnetic interference (EMI)
• Very high ESD robustness, ± 9 kV according to IEC 61000-4-2
• Protected against automotive transients
• Receive - Only Mode for node failure analysis
• TxD Time - Out function and RxD recessive clamping with failure indication
• TxD to RxD short circuit recognition with failure indication
• CANH and CANL short circuit recognition with failure indication
• Bus dominant clamping diagnosis
• Under - voltage detection at V_CC, V_IO and V_S
• Power - Up and Wake - Up source recognition
• Short circuit proof and Over - Temperature protection
• Green Product (RoHS compliant)
• AEC Qualified
PG-DSO-14
Description
As a successor of the TLE6251G, the TLE6251-2G is designed to provide an excellent passive behavior in Power Down
mode. This feature makes the TLE6251-2G extremely suitable for mixed supply CAN networks. The TLE6251-2G provides
different operation modes with a very low quiescent current in Sleep Mode. Based on the high symmetry of the CANH and
CANL signals, the TLE6251-2G provides a very low level of electromagnetic emission (EME) within a broad frequency
range. The TLE6251-2G is integrated in a RoHS compliant PG-DSO-14 package and fulfills or exceeds the requirements
of the ISO11898-5. The TLE6251G and the TLE6251-2G are fully pin compatible and function compatible.
Based on the Infineon Smart Power Technology SPT^®, the TLE6251-2G provides industry leading ESD
robustness together with a very high electromagnetic immunity (EMI). The Infineon Smart Power Technology
SPT^® allows bipolar and CMOS control circuitry in accordance with DMOS power devices to exist on the same
monolithic circuit. The TLE6251-2G and the Infineon SPT^® technology are AEC qualified and tailored to withstand
the harsh conditions of the Automotive Environment.
Type
TLE6251-2G
Data Sheet
Package
PG-DSO-14
3
Marking
TLE6251-2G
Rev. 1.0, 2009-05-07