TLE6251-2G Datasheet, PDF (32/35 Pages) Infineon Technologies AG – High Speed CAN-Transceiver with Wake and Failure Detection

TLE6251-2G
Application Information
11.2
ESD Robustness according to IEC61000-4-2
Test for ESD robustness according to IEC61000-4-2 “Gun test” (150 pF, 330 Ω) have been performed. The results
and test conditions are available in a separate test report.
Table 7 ESD Robustness according to IEC61000-4-2
Performed Test
Result Unit
Electrostatic discharge voltage at pin V_S, CANH, ≥ + 9
kV
CANL and WK versus GND
Electrostatic discharge voltage at pin V_S, CANH, ≤ - 9
kV
CANL and WK versus GND
Remarks
1)_{Positive pulse}
1)_{Negative pulse}
1) ESD susceptibility “ESD GUN” according to “Gift ICT Evaluation of CAN Transceiver “Section 4.3. (IEC 61000-4-2:
2001-12) -Tested by external test house (IBEE Zwickau, EMC Testreport Nr. 07a-04-09).
11.3
Voltage Drop over the INH Output
9ROWDJH'URSRQWKH,1+RXWSXWSLQ

9ROWDJH'URS9
7_- ƒ&
7_- ƒ&
7_- ƒ&







,1+2XWSXW&XUUHQWP$
Figure 17 INH output voltage drop versus output current (typical values only!)
11.4
Further Application Information
• Please contact us for information regarding the FMEA.
• Existing App. Note
• For further information you may contact http://www.infineon.com/transceiver
Data Sheet
32
Rev. 1.0, 2009-05-07