TLE6251-2G Datasheet, PDF (27/35 Pages) Infineon Technologies AG – High Speed CAN-Transceiver with Wake and Failure Detection

TLE6251-2G
Electrical Characteristics
Table 6 Electrical Characteristics (cont’d)
4.75 V < V_CC < 5.25 V; 3.0 V < V_IO < 5.25 V; 6.0 V < V_S < 18 V; R_L = 60 Ω; normal mode; -40 °C < T_j < 150 °C; all
voltages with respect to ground; positive current flowing into pin; unless otherwise specified.
Pos. Parameter
Symbol Limit Values Unit Conditions
Min. Typ. Max.
Transmission Input TxD
10.1.13 High level input range
10.1.14 Low level input range
10.1.15 HIGH level input current
10.1.16 TxD pull-up resistance
Mode Control Inputs EN, NSTB
V_TD,H
V_TD,L
I_TD
R_TD
0.7 × –
V_IO
- 0.3 –
-5 0
10 20
V_IO + V
0.3 V
0.3 × V
V_IO
5
µA
40 kΩ
Recessive state
Dominant state
V_TxD = V_IO
–
10.1.17 High level input range
10.1.18 Low level input range
10.1.19 LOW level input current
10.1.20 Pull-down resistance
Diagnostic Output NERR
V_M,H
V_M,L
I_MD
R_M
0.7 × –
V_IO
- 0.3 –
-5 0
50 100
V_IO + V
0.3 V
0.3 × V
V_IO
5
µA
200 kΩ
Recessive state
Dominant state
V_EN and V_NSTB = 0V
–
10.1.21 HIGH level output voltage
10.1.22 LOW level output voltage
Termination Output SPLIT
V_NERR,H 0.8 × –
V_IO
V_NERR,L –
–
–
V I_NERR = -100 µA
0.2 × V
V_IO
I_NERR = 1.25 mA
10.1.23 Split output voltage
10.1.24 Split output voltage
no load
10.1.25 Leakage current
10.1.26 Output resistance
V_SPLIT
V_SPLIT
I_SPLIT
R_SPLIT
0.3 × 0.5 × 0.7 × V
V_CC V_CC V_CC
0.45 × 0.5 × 0.55 × V
V_CC V_CC V_CC
-5 0 5
µA
– 600 –
Ω
Normal Operation Mode;
-500 µA < I_SPLIT < 500 µA
Normal Operation Mode;
no load
Sleep Mode
V_CC = V_IO = 0 V
R_SPLIT =
(V_SPLIT(500 µA) - V_SPLIT(-500 µA)) / 1mA
Data Sheet
27
Rev. 1.0, 2009-05-07