Q67060-S6136 Datasheet, PDF (6/18 Pages) Infineon Technologies AG – Addendum for PCN-Datasheet 2004-018-A

PCN 2004-018-A: BTS 5440G
Electrical Characteristics
Parameter and Conditions, each of the four channels Symbol
at T_j = -40...+150 °C, V_bb = 9...16 V, unless otherwise specified
Thermal Resistance
junction - soldering point¹⁾
junction - ambient²⁾
each channel: R_thJS
one channel active: RthJA
all channels active:
Values
Unit
min. typ. max.
-
- 25 K/W
-
40
- K/W
32
Load Switching Capabilities and Characteristics
On-state resistance (V_bb to OUT), (see page 13)
T_j = 25 °C, I_L = 5 A,
each channel:
T_j = 150 °C,
each channel:
T_j = 25 °C,
two parallel channels:
T_j = 25 °C,
four parallel channels:
R_ON
Nominal load current²⁾
T_a = 85°C, T_j ≤ 150°C ,
one channel active:
two channels active, per channel:
I _L(nom)
mΩ
- 21 25
- 42 50
- 11 13
- 5.5 6.5
5.7 6.2
4.0 4.4
A
-
-
four channels active, per channel:
3.1 3.4 -
Output voltage drop limitation at small load currents V_ON(NL)
-
40
- mV
I_L = 0.5 A
Output current while GND disconnected³⁾
I_L(GNDhigh) -
-
2 mA
( see diagram page 12 )
V_IN = 0 V
1Soldering _{point is measured at Vbb-pin}
2Device _{on 50mm*50mm*1.5mm epoxy PCB FR4 with 6 cm2 (one layer, 70µm thick) copper area for Vbb}
connection. PCB is vertical without blown air.
3not _{subject to production test, specified by design}
Page 5
2004-Mar-08