Q67060-S6136 Datasheet, PDF (10/18 Pages) Infineon Technologies AG – Addendum for PCN-Datasheet 2004-018-A

PCN 2004-018-A: BTS 5440G
Electrical Characteristics
Parameter
at T_j = -40...+150 °C, V_bb = 9...16 V, unless otherwise specified
Diagnostic Characteristics
Status invalid after negative input slope
Status invalid after positive input slope
with open load
Symbol
t_d(SToff)
t_d(STOL)
Input Feedback¹⁾
Input resistance (see circuit page 11)
Input turn-on threshold voltage
Input turn-off threshold voltage
Input threshold hysteresis
Off state input current
V_IN = 0.4 V
On state input current
V_IN = 5 V
R_I
V_IN(T+)
V_IN(T-)
∆V _IN(T)
I _IN(off)
I _IN(on)
Values
Unit
min. typ. max.
-
- 1.2 ms
-
-
20 µs
2.0 3.5 5.5 kΩ
-
- 2.4 V
1.0 -
-
- 0.5 -
3
- 40 µA
20 50 90
Reverse Battery²⁾
Reverse battery voltage
Drain-source diode voltage (V_OUT > V_bb)
T_j = 150 °C, I_bb = -10 mA
-V_bb
-V_ON
-
- 27 V
- 330 - mV
1If _{ground resistors RGND are used, add the voltage drop across these resistor.}
2Requires _{a 150Ω resistor in GND connection. The reverse load current through the intrinsic drain-source diode}
has to be limited by the connected load. Power dissipation is higher compared to normal operating conditions
due to the voltage drop across the drain-source diode. The temperature protection is not active during reverse
current operation! Input and status currents have to be limited. (see max. ratings page 4 )
Page 9
2004-Mar-08