XC167CI-16F_06 Datasheet, PDF (58/90 Pages) Infineon Technologies AG – 16-Bit Single-Chip Microcontroller with C166SV2 Core

4
Electrical Parameters
XC167CI-16F
Derivatives
Electrical Parameters
4.1
General Parameters
Table 9
Absolute Maximum Ratings
Parameter
Symbol
Limit Values
Unit Notes
Storage temperature
Junction temperature
Voltage on V_DDI pins with
respect to ground (V_SS)
Voltage on V_DDP pins with
respect to ground (V_SS)
Voltage on any pin with
respect to ground (V_SS)
Input current on any pin
during overload condition
T_ST
T_J
V_DDI
V_DDP
V_IN
–
Min.
-65
-40
-0.5
-0.5
-0.5
-10
Max.
150
150
3.25
°C
1)
°C
under bias
V
–
6.2
V
–
V_DDP +
V
2)
0.5
10
mA –
Absolute sum of all input –
–
currents during overload
condition
|100|
mA –
1) Moisture Sensitivity Level (MSL) 3, conforming to Jedec J-STD-020C for 260 °C for PG-TQFP-144-7, and
240 °C for P-TQFP-144-19.
2) Input pins XTAL1/XTAL3 belong to the core voltage domain. Therefore, input voltages must be within the
range defined for V_DDI.
Note: Stresses above those listed under “Absolute Maximum Ratings” may cause
permanent damage to the device. This is a stress rating only and functional
operation of the device at these or any other conditions above those indicated in
the operational sections of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
During absolute maximum rating overload conditions (V_IN > V_DDP or V_IN < V_SS) the
voltage on V_DDP pins with respect to ground (V_SS) must not exceed the values
defined by the absolute maximum ratings.
Data Sheet
56
V1.3, 2006-08