SAB80C517 Datasheet, PDF (45/61 Pages) Siemens Semiconductor Group – 8-Bit CMOS Single-Chip Microcontroller

SAB 80C517/80C537
Absolute Maximum Ratings
Ambient temperature under bias
SAB 80C517/83C537.................................................................................. 0 to 70 ^oC
SAB 80C517/83C537-T40/85.................................................................................... – 40 to 85 ^oC
Storage temperature T_ST ............................................................................ – 65 to 150 ^oC
Voltage on V_CC pins with respect to ground (V_SS) ...................................... – 0.5 V to 6.5 V
Voltage on any pin with respect to ground (V_SS)......................................... – 0.5 to V_CC +0.5 V
Input current on any pin during overload condition ..................................... – 10mA to +10mA
Absolute sum of all input currents during overload condition ..................... |100mA|
Power dissipation ........................................................................................ 2 W
Note
Stresses above those listed under "Absolute Maximum Ratings" may cause permanent
damage of the device. This is a stress rating only and functional operation of the device
at these or any other conditions above those indicated in the operational sections of this
specification is not implied. Exposure to absolute maximum rating conditions for longer
periods may affect device reliability. During overload conditions (V_IN > V_CC or V_IN < V_SS)
theVoltage on V_CC pins with respect to ground (V_SS) must not exeed the values definded
by the absolute maximum ratings.
DC Characteristics
V_CC = 5 V ± 10 %; V_SS = 0 V;
T _A = 0 to 70 ^oC for the SAB 80C517/83C537
T _A = – 40 to 85 ^oC for the SAB 80C517-/83C537-T40/85
Parameter
Symbol
Input low voltage (except EA) V _IL
Input low voltage (EA)
V_IL1
Input high voltage
V_IH
Input high voltage to XTAL2
Input high voltage to RESET
Output low voltage
(ports 1, 2, 3, 4, 5, 6)
Notes see page 47.
V _IH1
V _IH2
V_OL
Limit Values Unit Test Condition
min.
max.
– 0.5
0.2 V_CC– V
– 0.1
– 0.5
0.2 V_CC – V
– 0.3
0.2 V_CC V _CC + 0.5 V
+ 0.9
0.7 V_CC V_CC + 0.5 V
0.6 V_CC V_CC + 0.5 V
–
0.45
V
–
–
–
–
–
I_OL = 1.6 mA¹⁾
Semiconductor Group
44