TLE6240GP Datasheet, PDF (4/23 Pages) Infineon Technologies AG – Smart 16-fold Low-Side Switch

Data Sheet TLE 6240 GP
Maximum Ratings for T_j = – 40°C to 150°C
Parameter
Supply Voltage
Continuous Drain Source Voltage (OUT1...OUT16)
Input Voltage, All Inputs and Data Lines
Load Dump Protection V_{Load Dump} = U_P+U_S; U_P=13.5 V
R_I¹⁾⁼² Ω; t_d=400ms; IN = low or high
Channel 1-8 with Automotive Relay R_L = 65 Ω
Channel 9-16 with Automotive Injector Valve R_L = 14 Ω
R_I=2 Ω; t_d=400ms; IN = low or high
Channel 1-8 with Load R_L = 24 Ω
Channel 9-16 with Load R_L = 6.8 Ω
Output Current per Channel (see el. characteristics)
Output Current per Channel @ T_A = 25°C
(All 16 Channels ON; Mounted on PCB ) ³⁾
Output Current
(Max. total current of all channels on; Heat Sink required)
Single Pulse Inductive Energy (internal clamping)
T_J = 25°C, I_D1-8 = 0.5 A, I_D9-16 = 1 A
Power Dissipation (DC, mounted on PCB) @ T_A = 25°C
Electrostatic Discharge Voltage (Human Body Model)
according to MIL STD 883D, method 3015.7 and EOS/ESD
assn. standard S5.1 - 1993
DIN Humidity Category, DIN 40 040
IEC Climatic Category, DIN IEC 68-1
Thermal Resistance
junction - case (die soldered on heat slug)
junction - ambient @ min. footprint
junction - ambient @ 6 cm² cooling area with heat pipes
Symbol Values
V_S
-0.3 ... +7
V_DS
45
V_IN
V_{Load Dump}²⁾
- 0.3 ... + 7
Unit
V
V
V
V
90
65
I_D(lim)
I_D1-8
I_D9-16
I_Dmax
65
50
I_{D(lim) min}
A
0.3
A
0.5
14
A
E_AS
50 mJ
P_tot
V_ESD
3.3 W
2000
V
R_thJC
R_thJA
E
40/150/56
1.5 K/W
50
38
Minimum footprint
PCB with heat pipes,
back side 6 cm² cooling area
1₎
2₎
3₎
R_I=internal resistance of the load dump test pulse generator LD200
V_LoadDump is setup without DUT connected to the generator per ISO 7637-1 and DIN 40 839.
Output current rating so long as maximum junction temperature is not exceeded. At T_A = 125
°C
the
output
cur-
rent has to be calculated using R_thJA according mounting conditions.
V3.1
Page 4
26.Aug 2002