TLE5010 Datasheet, PDF (39/56 Pages) Infineon Technologies AG – GMR Based Angular Sensor

TLE5010
Draft
Register Table
TST
Addr: 0C_H
Reset Value: 00_H
7
6
5
4
3
2
1
TEMP_EN ADCPY FILT_PAR FILT_CRS FIR_BYP TST_ADC TST_GMR
WL
WL
WL
WL
WL
WL
WL
0
TST_
CHAN
WL
Field
Bits Type Description
TEMP_EN
7
W L Temperature Device Enable
0: Temperature Measurement disabled
1: Temperature Measurement enabled
The X value represents the temperature.
Automatic update mode enabled, if AUTO='1'
ADCPY
6
W L Y Polarity
0: No inversion of Y bit stream
1: Inversion of Y bit stream (rotating direct. changed)
FILT_PAR
5
W L Filter switched parallel
0: Filters in normal mode
1: Filters parallel, input selected by TST_CHAN
FILT_CRS
4
W L Filter switched across
0: Filters in normal mode
1: Filters crossed, X and Y outputs are exchanged
FIR_BYP
3
TST_ADC ¹⁾ 2
TST_GMR ¹⁾ 1
W L FIR Filter Bypass
0: No FIR Bypass
1: FIR Bypass
W L ADC input switch to TST1and TST2
0: No ADC input switch, normal operation
1: ADC input switched to TST1,2, ADC selected by
TST_CHAN ²⁾
W L GMR switch to TST1and TST2
0: No GMR switch, normal operation
1: GMR switched to TST1,2 ²⁾
TST_CHAN 0
W L Test Channel select
0: X channel linked to TST1and TST2
1: Y channel linked to TST1and TST2
1) _{Only for test purposes}
2) _{if TST_ADC and TST_GMR are set to ’1’ at the same time, TST_GMR is forced to 0. TST_ADC has the higher}
priority.
Preliminary Data Sheet
39
V 0.9, 2007-05