TLE6254-2G Datasheet, PDF (3/24 Pages) Infineon Technologies AG – Fault Tolerant Differential CAN-Transceiver

Final Data TLE 6254-2G
Table 1
Pin No.
7
8
9
10
11
12
13
14
Pin Configuration (top view)
Pin Definitions and Functions (cont’d)
Symbol Function
WK
Wake-Up input; if level of V_WAKE changes the device
indicates a wake-up from low power mode by switching the
RxD and INT outputs LOW and switching the INH output
HIGH (in sleep mode), see Table 2
RTH
Termination resistor output; connect to CANH bus-line via
termination resistor (500 Ω < R_RTH < 16 kΩ), controlled by
internal failure management
RTL
Termination resistor output; connect to CANL bus-line via
termination resistor (500 Ω < R_RTL < 16 kΩ), controlled by
internal failure and mode management
V_CC
Supply voltage input; + 5 V, block to GND directly at the IC
with ceramic capacitor
CANH
CAN bus line H; HIGH: dominant state
CANL
CAN bus line L; LOW: dominant state
GND
Ground
V_S
Battery voltage supply input; block to GND directly at the
IC with ceramic capacitor
Data Sheet Version 1.4
3
2003-07-22