TLE6254-2G Datasheet, PDF (10/24 Pages) Infineon Technologies AG – Fault Tolerant Differential CAN-Transceiver

Final Data TLE 6254-2G
5.3
Application Hints
Circuit Description
Table 4
Not Needed Pins
Pin Symbol Recommendation
INH
Leave open
NERR
Leave open
NSTB
ENT
WAKE
Connect to V_CC
Connect to V_CC
Connect to V_BAT, if not possible connect to GND: increases current
consumption by approx. 5 µA
The transceiver will stay in a present operating mode until a suitable condition disposes
a state change. If not otherwise defined all conditions are AND-combined. The signals
V_CC and V_BAT show if the supply is available (e.g. V_CC = 1: V_CC voltage is present). If at
minimum one supply voltage is switched on, the start-up procedure begins (not figured).
After a delay time the device changes to normal operating or stand-by mode.
Data Sheet Version 1.4
10
2003-07-22