ICE3PCS01G Datasheet, PDF (20/24 Pages) Infineon Technologies AG – Standalone Power Factor Correction (PFC) Controller in Continuous Conduction Mode (CCM)

CCM-PFC
ICE3PCS01G
Electrical Characteristics
4.3.5 PFC Brownout Protection Section
Parameter
Input Brownout Protection High to Low
Threshold
Input Brownout Protection Low to High
Threshold
Blanking time for BOP turn_on
Input Brownout Protection BOP Bias
Current
Symbol
V_{BOP_H2L}
V_{BOP_L2H}
T_BOPon
I_BOP
Values
Min. Typ. Max.
0.98 1 1.02
1.2 1.25 1.3
20
-0.5
-
0.5
Unit Note / Test Condition
V
V
µs
µA V_BOP=1.25V
4.3.6 System Protection Section
Parameter
Symbol
Values
Unit Note / Test Condition
Min. Typ. Max.
Over Voltage Protection (OVP1) Low to V_{OVP1_L2H} 2.65 2.7 2.77 V 108%V_BULKRated
High
Over Voltage Protection (OVP1) High to V_{OVP1_H2L} 2.45 2.5 2.55 V
Low
Over Voltage Protection (OVP1)
Hysteresis
V_{OVP1_HYS} 150 200 270 mV
Blanking time for OVP1
T_OVP1
12
µs
Over Voltage Protection (OVP2) Low to V_{OVP2_L2H} 2.45 2.5 2.55 V
High
Over Voltage Protection (OVP2) High to I_{OVP2_H2L}
Low
2.25 2.3 2.35 V
Blanking time for OVP2
OVP2 mode detection threshold
Current source for OVP2 mode
detection¹⁾
T_OVP2
12
µs
V_{OVP2_mode}
0.5
V comparator at VBTHL pin
I_{OVP2_mode}
4
5
6 µA current source at VBTHL
pin
Peak Current Limitation (PCL) ISENSE V_PCL
Threshold
-180 -200 -220 mV
Blanking time for PCL turn_on
T_PCLon
200
ns
1) _{The parameter is not subject to production test - verified by design/characterization}
4.3.7 Internal Voltage Reference
Parameter
Output Reference Voltage
Load Regulation
Line Regulation
Symbol
V_{VREF_0A}
∆V_{VREF_5mA}
∆V_{VREF_VCC}
Values
Unit Note / Test Condition
Min. Typ. Max.
4.9
5
5.1
V I_VREF=0mA
50 mV I_VREF=-5mA¹⁾
25 mV ∆V_CC=3V
Version 2.0
20
5 May 2010