ICB2FL01G Datasheet, PDF (2/56 Pages) Infineon Technologies AG – Smart Ballast Control IC for Fluorescent Lamp Ballasts

2^nd Generation FL-Controller for FL-Ballasts
ICB2FL01G
Revision History
Datasheet ICB2FL01G
Actual Release: V1.2 Date: 05.05.2010
Previous Release: 18.02.2009
Page of
Page of Subjects changed since last release
actual Rel. prev. Rel.
3
3
Figure 1 Update
9
9
LVS1 Text Update
11
11
Figure 3 Update
21
21
Capter 2.4.2.1 Text Update and Figure 15 Update
24
24
PFC ON Time versus i_ZCD Signal
29
29
Update of Figure 26 and Text
38
38
Update 3.3 State Diagram
40
40
Update Protection Function Matrix HS Fil. Detection @ LVS1
53
53
BOM Update deleted Partnumbers of MOSFETs
54
54
Figure 42 Schematic of a serial Lamp Ballast Design
54
55
Figure 42 rename in Figure 43 and shift one page
For questions on technology, delivery and prices please contact the Infineon
Technologies Offices in Germany or the Infineon Technologies Companies and
Representatives worldwide: see the address list on the last page or our webpage at
http://www.infineon.com
Published by
Infineon Technologies AG
81726 Munich, Germany
© 2007 Infineon Technologies AG
All Rights Reserved.
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of
conditions or characteristics. With respect to any examples or hints given herein, any typical
values stated herein and/or any information regarding the application of the device,
Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind,
including without limitation, warranties of non-infringement of intellectual property rights
of any third party.
Information
For further information on technology, delivery terms and conditions and prices, please
contact the nearest Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements, components may contain dangerous substances. For information
on the types in question, please contact the nearest Infineon Technologies Office.
Infineon Technologies components may be used in life-support devices or systems only with
the express written approval of Infineon Technologies, if a failure of such components can
reasonably be expected to cause the failure of that life-support device or system or to affect
the safety or effectiveness of that device or system. Life support devices or systems are
intended to be implanted in the human body or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume that the health of the user
or other persons may be endangered.
Datasheet
Page 2 from 56
ICB2FL01G
V1.2