V23832-T2131-M101 Datasheet, PDF (15/30 Pages) Infineon Technologies AG – PAROLI 2 Tx AC, 1.6 Gbit/s

V23832-T2131-M101
V23832-R121-M101
Technical Data
Recommended Operating Conditions¹⁾ (cont’d)
Parameter
Symbol
Values
Unit
min.
typ.
max.
Data Input Skew⁶⁾
t_SPN
Data Input Rise/Fall Time⁷⁾
LVCMOS Input High Voltage
LVCMOS Input Low Voltage
LVCMOS Input Rise/Fall Time⁸⁾
Receiver
t_R-DI, t_F-DI 50
V_LVCMOSIH 2.0
V_LVCMOSIL V_EE
t_R-LVCMOSI,
t_F-LVCMOSI
0.5 x t_R-DI, ps
t_F-DI
280
ps
V_CC
V
0.8
V
20
ns
Power Supply Voltages
V_CC, V_CCO 3.0
3.3
3.6
V
Noise on Power Supply²⁾
N_PS
200
mV
Differential LVDS Termination R_t
80
Impedance
120
Ω
LVCMOS Input High Voltage
LVCMOS Input Low Voltage
LVCMOS Input Rise/Fall Time⁸⁾
Optical Input Rise/Fall Time⁹⁾
Input Extinction Ratio
V_LVCMOSIH 2.0
V_LVCMOSIL V_EE
t_R-LVCMOSI,
t_F-LVCMOSI
t_R-OI, t_F-OI
ER
6.0
V_CC
V
0.8
V
20
ns
320
ps
dB
Input Center Wavelength
λ_C
830
860
nm
Voltages refer to V_EE = 0 V.
1) _{Recommended range of input parameters for specified module functional performance.}
2) _{Noise frequency is 1 kHz to fmax, where fmax is equal to the maximum data rate in units of MHz. E.g. for a}
maximum data rate of 2700 Mbit/s, f_max = 2700 MHz. Power supply noise is defined with the recommended
filter in place at the supply side of the filtering circuit (see Figure 9 on Page 17).
3) _{The input stage can also be AC-coupled.}
4) _{Input level diagram: see Figure 7 on Page 16.}
5) _{|VID| = |(input voltage of non-inverted input minus input voltage of inverted input)|.}
6) _{Skew between positive and negative inputs measured at 50% level.}
7) _{20% - 80% level.}
8) _{Measured between 0.8 V and 2.0 V.}
9) _{20% - 80% level. Non filtered values.}
Data Sheet
15
2003-11-19