SLB9660 Datasheet, PDF (15/22 Pages) Infineon Technologies AG – Trusted Platform Module

SLB 9660 TPM1.2
Trusted Platform Module
Electrical Characteristics
Table 5-4 DC Characteristics for non-LPC Pins (continued)
Parameter
Symbol
Values
Unit Note or Test Condition
Min. Typ. Max.
Input low leakage
I_IL
-15
current
15
µA V_IN = 0V, GPIO and PP pins
Output high voltage
V_OH
Output low voltage
V_OL
V_DD-0.3
V
0.3 V
I_OH = 1mA, Pin GPIO
I_OL = 1mA, Pin GPIO
Table 5-5 DC Characteristics for LPC Pins
Parameter
Symbol
Values
Unit
Min. Typ. Max.
Ínput voltage high
V_IH
Input voltage low
V_IL
Input high leakage
I_IH
current
0.5 V_DD
-0.3
-10
V_DD+0.3 V
0.28 V_DD V
10
µA
Input low leakage
I_IL
-10
current
10
µA
Output high voltage
V_OH
0.9 V_DD
V
Output low voltage
V_OL
0.1 V_DD V
Note or Test Condition
All signal pins except GPIO and PP
All signal pins except GPIO and PP
V_IN = V_DD, all signal pins except
GPIO and PP
V_IN = 0V, all signal pins except
GPIO and PP
I_OH = -500µA, pins LAD[3:0] and
SERIRQ
I_OL = 1.5mA, pins LAD[3:0] and
SERIRQ
5.4
Timing
Some pads are disabled after deassertion of the reset signal for up to 500 µs. This is especially important for
the SERIRQ signal; after deassertion of the reset signal, this signal is only valid after that time has expired.
Data Sheet
15
Revision 1.0 2014-12-12