XC226X_08 Datasheet, PDF (12/116 Pages) Infineon Technologies AG – 16/32-Bit Single-Chip Microcontroller with 32-Bit Performance

XC2267 / XC2264
XC2000 Family Derivatives
General Device Information
Notes to Pin Definitions
1. Ctrl.: The output signal for a port pin is selected by bitfield PC in the associated
register Px_IOCRy. Output O0 is selected by setting the respective bitfield PC to
1x00_B, output O1 is selected by 1x01_B, etc.
Output signal OH is controlled by hardware.
2. Type: Indicates the pad type used (St=standard pad, Sp=special pad, DP=double
pad, In=input pad, PS=power supply) and its power supply domain (A, B, M, 1).
Table 4
Pin Definitions and Functions
Pin Symbol
Ctrl. Type Function
3 TESTM
I
In/B Testmode Enable
Enables factory test modes, must be held HIGH for
normal operation (connect to V_DDPB).
An internal pullup device will hold this pin high
when nothing is driving it.
4 P7.2
O0 / I St/B Bit 2 of Port 7, General Purpose Input/Output
EMUX0
O1 St/B External Analog MUX Control Output 0 (ADC1)
TxDC4
O2 St/B CAN Node 4 Transmit Data Output
CCU62_
I
CCPOS0A
St/B CCU62 Position Input 0
TDI_C
I
St/B JTAG Test Data Input
5 TRST
I
In/B Test-System Reset Input
For normal system operation, pin TRST should be
held low. A high level at this pin at the rising edge
of PORST activates the XC226x’s debug system.
In this case, pin TRST must be driven low once to
reset the debug system.
An internal pulldown device will hold this pin low
when nothing is driving it.
6 P7.0
O0 / I St/B Bit 0 of Port 7, General Purpose Input/Output
T3OUT
O1 St/B GPT1 Timer T3 Toggle Latch Output
T6OUT
O2 St/B GPT2 Timer T6 Toggle Latch Output
TDO_A
OH St/B JTAG Test Data Output
ESR2_1
I
St/B ESR2 Trigger Input 1
RxDC4B
I
St/B CAN Node 4 Receive Data Input
Data Sheet
10
V2.1, 2008-08