TLE6210G Datasheet, PDF (11/35 Pages) Infineon Technologies AG – ABS System IC

TLE 6210
TLE 6211
Block Description and Electrical Characteristics
Characteristics Voltage Regulator (cont’d)
6 V £ U_ZP £ 18 V, -40 °C £ T_j £ +150 °C, if not otherwise specified
#
Parameter
Sym-
bol
Limit Values Unit Conditions
min. typ. max.
4.4.4 Load variation DU_ST –
4.4.5 Temperature
variation
DU_ST –
4.4.6 Long time drift DU_ST
–
–
|50| mV T_j = 25 °C; U_ZP = 14 V;
0 mA £ I_ST £ 800 mA;
capacitor as defined in 4.4.11;
dI_ST/dt £ 1 mA/ms
|50| |100| mV U_ZP = 14 V; I_ST = I_STmax;
-40 °C £ T_j £ 150 °C;
capacitor as defined in 4.4.11;
for die mounted in a hybrid:
dT_U/dt £ 10 K/s
for P-DSO-20-12:
dT_G/dt £ 5 K/min.
U_ZP £ U_ZPmax.;
0 mA £ I_ST £ I_STmax.;
-40 °C £ T_j £ 150 °C;
–
|50| mV t_b = 10000 h, see conditions
M13.
4.4.7 Overall output U_ST
voltage tolerance
4.75 5.00 5.25 V
all parameters from 4.4.1 to
4.4.6
4.4.8 Power Supply DU_STss –
–
|25| mV 0 Hz £ f_UST £ 10 kHz;
ripple rejection
capacitor as defined in 4.4.11;
7 V £ U_ZP £ 24 V
4.4.9 Series Resistor R_DSon –
–
1.7 W T_j = 25 °C
–
–
2.7 W T_j = 150 °C
4.4.10 Maximum output I_K
current (output
shorted)
0.8 –
4.4.11 Load capacitor at C_UST 3.3 –
output U_ST
Z
–
4
4.4.12 U_ST off voltage U_STRest –
–
4.4.13 Clamping
voltage
U_ZST 5.5 –
1.6 A
U_CP > 15 V; U_ZP = 6 V;
I_ST = 800 mA
U_CP > 15 V; U_ST = 0 V;
4.5 V £ U_ZP £ 18 V
150 mF T_U = 20 °C; U_N = 25 V;
Type ETQW Roederstein
–
W f = 100 kHz; T_U = 20 °C
400 mV I_ST = 0 mA
7
V clamping voltage at
I = 100 mA
V1.2 Data Sheet
11
2002-08