ICS527R-01ILF Datasheet, PDF (7/11 Pages) Integrated Device Technology – CLOCK SLICER USER CONFIGURABLE ZERO DELAY BUFFER

ICS527-01
CLOCK SLICER USER CONFIGURABLE ZERO DELAY BUFFER
ZDB AND MULTIPLIER/DIVIDER
between decoupling capacitor and VDD pin. The PCB
trace to VDD pin should be kept as short as possible, as
should the PCB trace to the ground via.
2) To minimize EMI the 33Ω series termination resistor,
if needed, should be placed close to the clock outputs.
3) An optimum layout is one with all components on the
same side of the board, minimizing vias through other
signal layers. Other signal traces should be routed away
from the ICS527-01. This includes signal traces just
underneath the device, or on layers adjacent to the
ground plane layer used by the device.
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the ICS527-01. These ratings,
which are standard values for IDT commercially rated parts, are stress ratings only. Functional operation of
the device at these or any other conditions above those indicated in the operational sections of the
specifications is not implied. Exposure to absolute maximum rating conditions for extended periods can
affect product reliability. Electrical parameters are guaranteed only over the recommended operating
temperature range.
Item
Supply Voltage, VDD
All Inputs and Outputs
Ambient Operating Temperature (Commercial)
Ambient Operating Temperature (Industrial)
Storage Temperature
Junction Temperature
Soldering Temperature
Rating
7V
-0.5 V to VDD+0.5 V
0 to +70° C
-40 to +85° C
-65 to +150° C
125° C
260° C
Recommended Operation Conditions
Parameter
Ambient Operating Temperature, ICS527R-01
Ambient Operating Temperature, ICS527R-01I
Power Supply Voltage (measured in respect to GND)
Min.
0
-40
3
Typ.
–
–
3.3
Max.
+70
+85
3.6
Units
°C
°C
V
DC Electrical Characteristics
Unless stated otherwise, VDD = 3.3 V ±10%, Ambient Temperature 0 to +70° C
Parameter
Symbol
Conditions
Min. Typ.
Operating Voltage
VDD
3
3.3
Supply Current
IDD 15 MHz in, 60MHz out,
8
no load
Supply Current, Power Down IDDPD PDTS=0
20
Input High Voltage
V_IH
2
Max.
3.6
Units
V
mA
μA
V
IDT™ / ICS™ CLOCK SLICER USER CONFIGURABLE ZERO DELAY BUFFER 7
ICS527-01 REV G 051310