9DBV0531_17 Datasheet, PDF (5/17 Pages) Integrated Device Technology – 5-Output 1.8V HCSL Fanout Buffer

9DBV0531 DATASHEET
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the 9DBV0531. These ratings, which are standard
values for IDT commercially rated parts, are stress ratings only. Functional operation of the device at these or any other
conditions above those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods can affect product reliability. Electrical parameters are guaranteed only over the
recommended operating temperature range.
PARAMETER
SYMBOL
CONDITIONS
Supply Voltage
VDDx
Applies to all VDD pins
Input Voltage
V_IN
Input High Voltage, SMBus V_IHSMB
Storage Temperature
Ts
SMBus clock and data pins
Junction Temperature
Tj
Input ESD protection
ESD prot
Human Body Model
1_{Guaranteed by design and characterization, not 100% tested in production.}
2 _{Operation under these conditions is neither implied nor guaranteed.}
3 _{Not to exceed 2.5V.}
MIN
-0.5
-0.5
-65
2000
TYP
MAX
2.5
V_DD+0.5
3.3
150
125
UNITS NOTES
V
1,2
V
1,3
V
1
°C
1
°C
1
V
1
Electrical Characteristics–Clock Input Parameters
TA = T_COM or T_IND; Supply Voltages per normal operation conditions, See Test Loads for Loading Conditions
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
Input Crossover Voltage -
DIF_IN
V_CROSS
Cross Over Voltage
150
Input Swing - DIF_IN
V_SWING
Differential value
300
Input Slew Rate - DIF_IN dv/dt
Measured differentially
0.4
Input Leakage Current
I_IN
V_IN = V_{DD ,} V_IN = GND
-5
Input Duty Cycle
d_tin
Measurement from differential wavefrom
40
Input Jitter - Cycle to Cycle J_DIFIn
Differential Measurement
0
1 _{Guaranteed by design and characterization, not 100% tested in production.}
2_{Slew rate measured through +/-75mV window centered around differential zero}
MAX
900
8
5
60
125
UNITS NOTES
mV
1
mV
1
V/ns 1,2
uA
%
1
ps
1
MARCH 10, 2017
5
5-OUTPUT 1.8V HCSL FANOUT BUFFER