ICS854S01I Datasheet, PDF (17/17 Pages) Integrated Device Technology – 2:1 Differential-to-LVDS Multiplexer

ICS854S01I Datasheet
2:1 DIFFERENTIAL-TO-LVDS MULTIPLEXER
Ordering Information
Table 9. Ordering Information
Part/Order Number
854S01AKILF
854S01AKILFT
Marking
4S1A
4S1A
Package
“Lead-Free” 16 Lead VFQFN
“Lead-Free” 16 Lead VFQFN
Shipping Packaging
Tube
Tape & Reel
Temperature
-40C to 85C
-40C to 85C
NOTE: Parts that are ordered with an “LF” suffix to the part number are the Pb-Free configuration and are RoHS compliant.
Revision History
Date
6/15/2017
11/2/2012
10/29/2012
Description of Change
Updated the package drawings
Added Note: Thermal pad (E-pad) must be connected to ground (GND).
Deleted HiperClockS Logo. Updated GD paragraph to include CML.
Added CML to 3rd bullet.
Added figures 2D and 2E.
Deleted quantity from tape and reel.
Corporate Headquarters
6024 Silver Creek Valley Road
San Jose, CA 95138 USA
www.IDT.com
Sales
1-800-345-7015 or 408-284-8200
Fax: [phone]
www.IDT.com/go/sales
Tech Support
www.IDT.com/go/support
DISCLAIMER Integrated Device Technology, Inc. (IDT) and its affiliated companies (herein referred to as “IDT”) reserve the right to modify the products and/or specifications described herein at any time,
without notice, at IDT’s sole discretion. Performance specifications and operating parameters of the described products are determined in an independent state and are not guaranteed to perform the same
way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability
of IDT's products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not
convey any license under intellectual property rights of IDT or any third parties.
IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be rea-
sonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.
Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks used herein are the property
of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary. Integrated Device Technology, Inc.. All rights reserved.