ICS854S01I Datasheet, PDF (12/17 Pages) Integrated Device Technology – 2:1 Differential-to-LVDS Multiplexer

ICS854S01I Datasheet
2:1 DIFFERENTIAL-TO-LVDS MULTIPLEXER
3.3V LVDS Driver Termination
A general LVDS interface is shown in Figure 5 In a 100 differential
transmission line environment, LVDS drivers require a matched load
termination of 100 across near the receiver input. For a multiple
LVDS outputs buffer, if only partial outputs are used, it is
recommended to terminate the unused outputs.
3.3V
50Ω
LVDS Driver
50Ω
100Ω Differential Transmission Line
Figure 5. Typical LVDS Driver Termination
R1
100Ω
3.3V
+
–
ICS854S01AKI June 15, 2017
12
©2017 Integrated Device Technology, Inc.