8T49N283 Datasheet, PDF (15/77 Pages) Integrated Device Technology – FemtoClock NG Octal Universal Frequency Translator

8T49N283 Datasheet
Table 6C. Device ID Control Register Bit Field Locations and Descriptions
Device ID Control Register Block Field Locations
Address (Hex)
D7
D6
D5
D4
D3
D2
D1
D0
0002
REV_ID[3:0]
DEV_ID[15:12]
0003
DEV_ID[11:4]
0004
DEV_ID[3:0]
DASH_CODE [10:7]
0005
DASH_CODE [6:0]
1
Device ID Control Register Block Field Descriptions
Bit Field Name
REV_ID[3:0]
Field Type Default Value Description
R/W
0010b
Device revision.
DEV_ID[15:0]
R/W
0601h
Device ID code.
DASH CODE
[10:0]
R/W
NOTE¹
Device Dash Code:
Decimal value assigned by IDT to identify the configuration loaded at the factory. 
May be over-written by users at any time. Refer to FemtoClock NG Universal
Frequency Translator Ordering Product Information guide to identify major
configuration parameters associated with this Dash Code value.
NOTE 1: These values are specific to the device configuration 'dash-code'. Please refer to the FemtoClock NG Universal Frequency
Translator Ordering Product Information guide for exact default values.
©2016 Integrated Device Technology, Inc.
15
Revision H, October 26, 2016