ICS8543I Datasheet, PDF (1/17 Pages) Integrated Device Technology – Four differential LVDS output pairs

Low Skew, 1-to-4,
Differential-to-LVDS Fanout Buffer
ICS8543I
DATA SHEET
General Description
The ICS8543I is a low skew, high performance 1-to-4 Differen-
tial-to-LVDS Clock Fanout Buffer. Utilizing Low Voltage Differential
Signaling (LVDS) the ICS8543I provides a low power, low noise, so-
lution for distributing clock signals over controlled impedances of
100. The ICS8543I has two selectable clock inputs. The CLK,
nCLK pair can accept most standard differential input levels. The
PCLK, nPCLK pair can accept LVPECL, CML, or SSTL input levels.
The clock enable is internally synchronized to eliminate runt pulses
on the outputs during asynchronous assertion/deassertion of the
clock enable pin.
Guaranteed output and part-to-part skew characteristics make the
ICS8543I ideal for those applications demanding well defined perfor-
mance and repeatability.
Features
• Four differential LVDS output pairs
• Selectable differential CLK/nCLK or LVPECL clock inputs
• CLK/nCLK pair can accept the following differential input levels:
LVPECL, LVDS, LVHSTL, SSTL, HCSL
• PCLK/nPCLK pair can accept the following differential input
levels: LVPECL, CML, SSTL
• Maximum output frequency: 650MHz
• Translates any single-ended input signals to LVDS levels with
resistor bias on nCLK input
• Additive phase Jitter, RMS: 0.164ps (typical)
• Output skew: 40ps (maximum)
• Part-to-part skew: 600ps (maximum)
• Propagation delay: 2.6ns (maximum)
• Full 3.3Vsupply mode
• -40°C to 85°C ambient operating temperature
• Available in lead-free packages
Block Diagram
CLK_EN ^Pullup
CLK ^Pulldown
nCLK ^Pullup
0₀
PCLK ^Pulldown
1
nPCLK ^Pullup
1
CLK_SEL ^Pulldown
D
Q
LE
OE ^Pullup
Pin Assignment
Q0
nQ0
Q1
nQ1
GND 1
CLK_EN 2
CLK_SEL 3
CLK 4
nCLK 5
PCLK 6
nPCLK 7
OE 8
GND 9
VDD 10
20 Q0
19 nQ0
18 VDD
17 Q1
16 nQ1
15 Q2
14 nQ2
13 GND
12 Q3
11 nQ3
Q2
ICS8543I
nQ2
20-Lead TSSOP
Q3
6.5mm x 4.4mm x 0.925mm
nQ3
package body
G Package
Top View
ICS8543BGI REVISION E NOVEMBER 15, 2012
1
©2012 Integrated Device Technology, Inc.