ICS9DB306 Datasheet, PDF (9/16 Pages) Integrated Circuit Systems – PCI Express, Jitter Attenuator

Integrated
Circuit
Systems, Inc.
ICS9DB306
PCI EXPRESS,
JITTER ATTENUATOR
DIFFERENTIAL CLOCK INPUT INTERFACE
The CLK /nCLK accepts LVDS, LVPECL, LVHSTL, SSTL, HCSL
and other differential signals. Both V_SWING and V_OH must meet the
V_PP and V_CMR input requirements. Figures 4A to 4D show inter-
face examples for the HiPerClockS CLK/nCLK input driven by
the most common driver types. The input interfaces suggested
here are examples only. Please consult with the vendor of the
driver component to confirm the driver termination requirements.
For example in Figure 4A, the input termination applies for ICS
HiPerClockS LVHSTL drivers. If you are using an LVHSTL driver
from another vendor, use their termination recommendation.
1.8V
Zo = 50 Ohm
Zo = 50 Ohm
LVHSTL
ICS
HiPerClockS
LVHSTL Driver
3.3V
CLK
nCLK _HiPerClockS
Input
R1
R2
50
50
3.3V
Zo = 50 Ohm
LVPECL
Zo = 50 Ohm
3.3V
CLK
nCLK _HiPerClockS
Input
R1
R2
50
50
R3
50
FIGURE 4A. HIPERCLOCKS CLK/nCLK INPUT DRIVEN BY
ICS HIPERCLOCKS LVHSTL DRIVER
FIGURE 4B. HIPERCLOCKS CLK/nCLK INPUT DRIVEN BY
3.3V LVPECL DRIVER
3.3V
Zo = 50 Ohm
LVPECL
Zo = 50 Ohm
3.3V
R3
R4
125
125
3.3V
CLK
nCLK _HiPerClockS
Input
R1
R2
84
84
3.3V
Zo = 50 Ohm
LVDS_Driv er
R1
100
Zo = 50 Ohm
3.3V
CLK
nCLK _{Receiv er}
FIGURE 4C. HIPERCLOCKS CLK/nCLK INPUT DRIVEN BY
3.3V LVPECL DRIVER
FIGURE 4D. HIPERCLOCKS CLK/nCLK INPUT DRIVEN BY
3.3V LVDS DRIVER
9DB306BL
www.icst.com/products/hiperclocks.html
9
REV. A APRIL 7, 2005