IC227 Datasheet, PDF (4/22 Pages) IC-Haus GmbH – DUAL 11 GHz SAMPLING OSCILLOSCOPE

iC227
preliminary
DUAL 11 GHz SAMPLING OSCILLOSCOPE
CONNECTION BLOCK DIAGRAM 11 GHz
Rev B1, Page 4/22
If full bandwidth is required, the input signal must be
connected directly to CH1 and/or CH2. In this case
the trigger needs to be supplied via a separate cable
directly to the trigger input. The power splitter output
must always be terminated with 50 Ohm.
Figure 2: Full Bandwidth Setup