IC227 Datasheet, PDF (16/22 Pages) IC-Haus GmbH – DUAL 11 GHz SAMPLING OSCILLOSCOPE

iC227
preliminary
DUAL 11 GHz SAMPLING OSCILLOSCOPE
Second 11 GHz Measuring Example using iC212, iC149 and NZN-Eval-Board
Rev B1, Page 16/22
Figure 40: Set-up
Figure 41: Measurement
The trigger-output of iC149 is connected to ”TRIGGER
IN 2” while ”SPLITTER OUT 2” is terminated via 50 Ω.
”SAMPLER IN 1” is still connected to the iC212 Pho-
toreceiver. ”SAMPLER IN 1” can now be used for other
purposes, in this special case an ”Active Probe” is at-
tached to measure the CMOS-Trigger signal. The am-
plitude reads 0.469 V (divided by 10), resulting in 4.7 V.