IC-MHL200 Datasheet, PDF (3/33 Pages) IC-Haus GmbH – 12-BIT LINEAR / ROTARY POSITION HALL ENCODER

iC-MHL200
12-BIT LINEAR / ROTARY POSITION HALL ENCODER
PACKAGING INFORMATION TSSOP20
Rev C1, Page 3/33
PIN CONFIGURATION TSSOP20
20 19 18 17 16 15 14 13 12 11
<P-CODE>
<A-CODE>
<D-CODE>
1 2 3 4 5 6 7 8 9 10
PIN FUNCTIONS
No. Name Function
1 SLI¹⁾ BiSS Interface, Data Input
2 MA BiSS Interface, Clock Input
3 VPA +5 V Supply Voltage (analog)
4 VNA Ground (analog)
5 nc not connected
6 nc not connected
7 VZAP Zener Zapping Programming Voltage
8A
Incremental Output A (+ NU)
9B
Incremental Output B (+ NV)
10 Z
Index Output Z (+ NW)
11 VND Ground (digital)
12 VPD +5 V Supply Voltage (digital)
13 U
Commutation U (+NA)
14 V
Commutation V (+NB)
15 W Commutation W (+NZ)
16 PTE¹⁾ Test Enable Pin
17 NERR Error Output (active low)
18 GAIN Gain-Signal
19 ENZ Enable Index Z
20 SLO BiSS Interface, Data Output
Orientation of the logo ( MHL CODE ...) is subject to alteration.
IC top marking: <P-CODE> = product code, <A-CODE> = assembly code (subject to changes), <D-CODE> = date code (subject to changes);
1) _{If not used, the pin must be connect to VNA, VND.}