HCPL-7860 Datasheet, PDF (9/28 Pages) Agilent(Hewlett-Packard) – Isolated 15-bit A/D Converter

8-pin DIP Gull Wing Surface Mount Option 300
MOLDED
1.19
(0.047)
MAX.
9.65 ± 0.25
(0.380 ± 0.010)
PIN LOCATION (FOR REFERENCE ONLY)
1.02 (0.040)
1.19 (0.047)
8
7
6
5
6.350 ± 0.25
(0.250 ± 0.010)
1
2
3
4
(04..18930)TYP.
9.65 ± 0.25
(0.380 ± 0.010)
1.19 (0.047)
1.78 (0.070)
0.380 (0.015)
0.635 (0.025)
1.780
(0.070)
MAX.
(04..11695)MAX.
9.65 ± 0.25
(0.380 ± 0.010)
7.62 ± 0.25
(0.300 ± 0.010)
0.255 (0.075)
0.010 (0.003)
1.080 ± 0.320
(0.043 ± 0.013)
2.540
(0.100)
BSC
0.51 ± 0.130
(0.020 ± 0.005)
0.635 ± 0.25
(0.025 ± 0.010)
DIMENSIONS IN MILLIMETERS (INCHES).
TOLERANCES (UNLESS OTHERWISE SPECIFIED): xx.xx = 0.01
xx.xxx = 0.005
12° NOM.
LEAD COPLANARITY
MAXIMUM: 0.102 (0.004)
Package Characteristics
Unless otherwise noted, all specifications are at T_A = +25°C.
Parameter
Symbol Min. Typ. Max. Units
Input-Output Momentary
V_ISO 3750
V_rms
Withstand Voltage
(See note ** below)
Resistance (Input - Output) R_I-O 10¹² 10¹³
Ω
10¹¹
Capacitance
C_I-O
(Input - Output)
Input IC Junction-to-Case
θ_jci
Thermal Resistance
Output IC Junction-to-Case
θ_jco
Thermal Resistance
0.7
pF
96
°C/ W
114
°C/ W
Test Conditions
RH ≤ 50%, t = 1 min.
V_I-O = 500 Vdc
T_A = 100°C
f = 1 MHz
Thermocouple located at
center underside of
package
Note
14,15
15
** The Input-Output Momentary Withstand Voltage is a dielectric voltage rating that should not be interpreted as an input-output
continuous voltage rating. For the continuous voltage rating refer to your equipment level safety specification or HP Application Note
1074, Optocoupler Input-Output Endurance Voltage.
1-268