English
Language : 

HCPL-3120 Datasheet, PDF (6/15 Pages) Agilent(Hewlett-Packard) – 2.0 Amp Output Current IGBT Gate Drive Optocoupler
◁
Switching Specifications (AC)
Over recommended operating conditions (TA = -40 to 100°C, IF(ON) = 7 to 16 mA, VF(OFF) = -3.0 to 0.8 V,
VCC = 15 to 30 V, VEE = Ground) unless otherwise specified.
Parameter
Symbol
Propagation Delay
tPLH
Time to High
Output Level
Propagation Delay
tPHL
Time to Low
Output Level
Pulse Width
Distortion
PWD
Propagation Delay (tPHL - tPLH)
Difference Between PDD
Any Two Parts
Rise Time
Fall Time
UVLO Turn On
Delay
tr
tf
tUVLO ON
UVLO Turn Off
Delay
tUVLO OFF
Output High Level
Common Mode
Transient
Immunity
|CMH|
Output Low Level
Common Mode
Transient
Immunity
|CML|
Min.
0.10
0.10
-0.35
15
15
Typ.*
0.30
0.27
0.1
0.1
0.8
0.6
30
30
Max.
0.50
0.50
Units
µs
µs
Test Conditions
Rg = 10 Ω,
Cg = 10 nF,
f = 10 kHz,
Duty Cycle = 50%
Fig.
10, 11,
12, 13
14, 23
Note
14
0.3 µs
0.35 µs
15
34,35 10
µs
23
µs
µs
22
VO > 5 V, IF = 10 mA
VO < 5 V, IF = 10 mA
kV/µs
kV/µs
TA = 25°C,
IF = 10 to 16 mA,
VCM = 1500 V,
VCC = 30 V
TA = 25°C,
VCM = 1500 V,
VF = 0 V,
VCC = 30 V
24 11, 12
11, 13
*All typical values at TA = 25°C and VCC - VEE = 30 V, unless otherwise noted.
Package Characteristics
Parameter
Symbol Min. Typ. Max. Units Test Conditions Fig. Note
Input-Output
VISO
2500
VRMS RH < 50%,
8, 9
Momentary
t = 1 min.,
Withstand Voltage**
TA = 25°C
Resistance
RI-O
1012
Ω VI-O = 500 VDC
9
(Input - Output)
Capacitance
CI-O
(Input - Output)
0.6
pF f = 1 MHz
LED-to-Case
θLC
Thermal Resistance
LED-to-Detector
θLD
Thermal Resistance
467
°C/W Thermocoupler
28
located at center
442
°C/W underside of
package
Detector-to-Case
θDC
Thermal Resistance
126
°C/W
**The Input-Output Momentary Withstand Voltage is a dielectric voltage rating that should not be interpreted as an input-output
continuous voltage rating. For the continuous voltage rating refer to your equipment level safety specification or HP Application Note
1074 entitled “Optocoupler Input-Output Endurance Voltage.”
1-187
 ▷